Darn, seems like I burn a hell of a lot of fuel.
Thursday night I finished 9.5 gallons in 3 hrs, temp set at 240F for full flow 8gpm (had it set at 200F and burner cut on on off, did not want that to happen so raised it to 240F, inlet temp was probably about 60F, and for gum popping 5.3 gpm at 240F, burner cycled but did not need to set any higher).
I need to get an in-line Temp guage, 20 hrs and I destroyed two BE swivels. I only notice that they are rated for only 180F yesterday , but I did not think I reached 180F at the end of 200 feet of hose during the Maryland late winter/ early spring 45F nights.