Chris Tharpe
New member
not a bad idea Nigel but is that material poly or metal
working out of enclosed trailer
- Thread starter Chris Tharpe
- Start date
offdutyfireman
Active member
Expanded metal doesn't keep the elements out enough for me. Like the idea though. If my shop was big enough to hold all of my trucks it might be ok.
810f250
Griffs Services PowerWash
metal
810f250
Griffs Services PowerWash
The machines have custom covers, once they are cooled they are covered, I have priced the best truck tarp cover, it was $900 to cover the 14ft trailer
Tony Shelton
BS Detector, Esquire
I started with a 7x14 enclosed and cleaned filters with a mounted ultrasonic machine. That lasted one summer, then I moved on. It's too hot in this climate for crawling around inside.
Tony Shelton
BS Detector, Esquire
You could do what I did and have a semi enclosed trailer. You can have a cover made for the entire trailer of truck tarp.
All the doors are swing away and removable.
NICE!!!! On the weekends can you get dancing girls in there? :slap::thumbup2:
bamawash
New member
<TABLE class=tborder style="BORDER-TOP-WIDTH: 0px" cellSpacing=1 cellPadding=6 width="100%" align=center border=0><TBODY><TR title="Post 164476" vAlign=top><TD class=alt1>NICE!!!! On the weekends can you get dancing girls in there? :slap::thumbup2: </TD></TR><!-- END TEMPLATE: newreply_reviewbit --><!-- BEGIN TEMPLATE: newreply_reviewbit --><TR><TD class=thead colSpan=2></TD></TR></TBODY></TABLE>That would be a deal sealer there !
Clean Image
New member
you would Tony!
810f250
Griffs Services PowerWash
F350 gas motor pulls it, she moans when the 535 tank and the chem tanks are full, I would guess all the extra steel is about 600 lbs.
810f250
Griffs Services PowerWash
Si !! lol
The Cleaner
Vetran Washer 30 Years Plus
Taking a S**T in the trailer is the only positive thing I can see with an enclosed trailer. Although I am an outdoorsey kind of guy and I dont mind using a good Bush.:kma:
Grime Busters LLC
New member
Tony Shelton
BS Detector, Esquire
Welcome back Leonardo de Pressure Washer!!!!
Hey I'm in Vegas, Last time Shelly and I went out there were cage dancing girls all over the club. Don't you guys have that in DC?
(NOTE: we are honestly too old for the "club" but occasionally we go out just to see what the younger generation is doing and to laugh at them with their silly little effeminate "designer" drugs....:crazy_pilot:
Clean County PW
Active member
You could do what I did and have a semi enclosed trailer. You can have a cover made for the entire trailer of truck tarp.
All the doors are swing away and removable.
Nice talking with you today Nigel. You sure know your stuff and mint Idea here with your trailer. Who desined that for you?? Was it your idea and they built it?? Either way real smart Idea:triniti:
810f250
Griffs Services PowerWash
John great talking to you too, yes I designed it, countless hours of reading and looking, lol, talking with pressure wash supply companies, some of them got tired of me, lol. The builder was BCE Systems in Georgia.
Its not perfect, one mayor change I would make is the coils (there are other changes, lol), the burner is a Frankenstein, but the coils should have been bigger, to get a better heat rise at full flow 8.5 gpm each unit. Heat rise at 4 GPH fuel, thats recommended max for a 20" chamber, only gives ~110 degree rise at the end of 200ft of 1/2" hose 75F air and ~57F inlet (still have to measure it at the boiler) Coil temp at exit of boiler is >400F. I should have followed my mind and visited during testing.
With the trapped pressure unloaders I could reduce flow with a smaller nozzles and get a higher heat rise for stubborn spots or severe gum, but the impact of 8.5gpm at 3600psi is tremendous compared to 6gpm at 3500psi, if chemistry have not done the loosening work, its probably is not going anywhere.