Using Chemicals...

c4org

c4org

New member
Ok, this might be in the forum already... i tried looking it up but couldnt find exactly what i wanted to know... I have a dewalt power washer, it came with a little tube for chemical... now when i use chemicals for a house... do i put the chemicals in a bucket and put the little tube in the bucket and let the water and the chemical mix when i spray? how much chemical is needed for a 2 story house around? where can i get good chemical for siding? how much does it cost? and what exactly is a remote that goes on your wand which u can stop chemical from coming out? and can i hook it up 2 my power washer? where can i get one? how much does it cost? sorry i have SO MANY questions...!!! please help thank you.
 
most of the guys here make there own house mix, mine is 1gal of 12% or 2 gal of bleach, a dash of borax,cascade,dawn and then top it of with water in a fiver. you can do it like you said with the little tube in the bucket, but i x-jet it. takes about 5 buckets for a 2 story. your way maby 3. but you might have to jack it up a little more bleach. the other guys here know all the ratios when they chime in they could help.
 
Chris , the best way is to do away with the little plastic jug and mix your chems in a 5 gallon bucket , like for house wash , I would use a 60/40 mix of 12.5 to 16 % sodium hypochlorite ton water with some good soap for a surfactant then downstream it (with the LITTLE TUBE in the 5 gallon bucket) if the LITTLE TUBE is not long enough replave it with a 3/8 that is about 4 to 5 feet long , this will insure that you can pull from the bottom of the bucket
 
You must log in or register to reply here.
Back
Top