Suttner ST54 Dual Lance Wand-Special

[Paul Kassander]

Daily Deals!
1/6/11
Suttner ST-54 Dual Lance​

​

Suttner ST54 Dual Lance Wand - Part # 7222 $39.83​

This item still qualifies for our FREE SHIPPING!​

For use when high and low pressures are needed such as downstream soap applications. ST-54 has a protective lip on the side handle and a stainless steel internal adjustment rod for longer life.
38" Zinc-Plated Dual Lance Wand, 1/4” MPT Inlet, Dual 1/4" Pipes with 1/4” FPT Outlets, 4,500 PSI, 10.5 GPM, 300 Degrees Fahrenheit

 

[Doug Rucker]

Paul, does that lance have a slight bend at the tip, or is it completely straight?

 

[Paul Kassander]

There is a slight bend, tough to tell from the pic though.

 

[Doug Rucker]

Ok thanks. Let me know if you ever run across the kind that are completely straight without the black protective cover.

 

[Ron Musgraves]

Great price Paul

 

[dieseldad97]

Got a question. I'm using a straight lance and changing tips to pull chems while d/s and rinsing. Are there alot of guys using this dual adjustable lance for washing houses? Or what are they using it for?

 

[Paul Kassander]

Some will, they are for the guy who likes to regulate the pressure randomly or people who downstream a lot like fleet washers. By cracking the handle in small increments you can reduce the pressure a little at a time. People like them for flat work too because they can reduce the pressure along mulch beds to keep the stuff from flying all over the place.

 

[pdmcali]

See this make me wonder what are the best size nozzles to use in a dual lance wand?

 

[Doug Rucker]

Some will, they are for the guy who likes to regulate the pressure randomly or people who downstream a lot like fleet washers. By cracking the handle in small increments you can reduce the pressure a little at a time. People like them for flat work too because they can reduce the pressure along mulch beds to keep the stuff from flying all over the place.

Exactly what Paul said. When I want to draw chem from my bucket I put in the chem nozzle so the chem comes out fast and at higher volume.

As for tips, I use the tips rated for the machine.

 

[Paul Kassander]

Most will use a soap nozzle in one side and the high pressure in the regular side. But some that don't downstream soap may use 2 high pressure nozzles so when they open it up it only drops a little.

For example if you run a #6 in the regular high pressure side for 3000psi but you want to drop to 1000 lbs for certain areas and that would be a #10 tip just install a #4 on the handle controlled side. When you open the handle you have a #6 and #4 which equal a #10.

 

[wgasa]

Do you have the 41or 42 inch model ? Thanks

 

[Ron Musgraves]

Daily Deals!

1/6/11
Suttner ST-54 Dual Lance​

​

Part # 7222 $39.83​

This item still qualifies for our FREE SHIPPING!​

For use when high and low pressures are needed such as downstream soap applications. ST-54 has a protective lip on the side handle and a stainless steel internal adjustment rod for longer life.
38" Zinc-Plated Dual Lance Wand, 1/4” MPT Inlet, Dual 1/4" Pipes with 1/4” FPT Outlets, 4,500 PSI, 10.5 GPM, 300 Degrees Fahrenheit

This is the best dual lance on the market

 

[Paul Kassander]

Do you have the 41or 42 inch model ? Thanks

The Suttners are only available in a 38", we do carry the MTM lance in a 40" here.

 

[wgasa]

I find the extra few inch's help the lower back when popping gum, you don't have as much leaning forward posture, decreasing the low back pain after a couple hours of popping.The MTM spec says 42' If this is correct I want one if the shipping is free. Thanks

 

[Paul Kassander]

You bet shipping is free as long as you spend at least $50.00.