Nozzle Orifice hole diameter???

[flanbo]

Anyone know the 0 degree nozzle orifice hole diameter for 4gpm 8gpm 10gpm machines? Odd question I know about to tinker

 

[814jeffw]

I'd say little---
I don't know,..find a machine shop and see if they have a set of pin gauges,..the 8 and 10 may be able to gotten really close with drill bits,..and maybe even the 4 I suppose,..if you have a set of really small drill bits.

Jeff

 

[offdutyfireman]

Zero simply means it's round. You want diameter for zero tip to downstream or set unloader?

 

[Ralph Q]

Not sure if this is what you are looking for Joe. http://www.hotsy.com/docs/catalog/Nozzles.pdf

 

[Kiloman]

The barrons nozzel chart is very helpful you can plug in psi gpm etc.

 

[flanbo]

Need to order some aluminum tubing. Have an idea for a higher reaching nozzle. How the hell to machine the tubing is going to be a pita. It will either work great or not at all.

 

[CP Pressure Washing]

if your looking for a high reach nozzle for soft washing check this out.... http://www.pwsupplies.com/index.php?route=product/product&path=62_76&product_id=113 Sniper Long Range Nozzle
that chart will help out a lot give it a look over