Legacy Truck Mount Hose Reel UAMCC Special

B

BWilson

New member
[h=1]http://shop.powerwashstore.com/searchquick-submit.sc?keywords=1749 Legacy Truck Mount Pivot Reel- 200' #1749[/h]
1407427165603-1874770827.jpeg
$321.65 SHIPPED PAID UAMCC MEMBERS SAVE ANOTHER $20




<!-- AddThis Button BEGIN -->
<iframe title="AddThis utility frame" id="_atssh410" style="border: 0px currentColor; border-image: none; left: 0px; top: 0px; width: 1px; height: 1px; position: absolute; z-index: 100000;"></iframe>
<!-- AddThis Button END -->

Rugged heavy-duty construction for commercial applications, Flip over hose guide allows use from either side of reel, oversized to easily fit the advertised length of hose, New swivel design is extended to prevent bends and stress on the hose, fully assembled(ready to use out of the box)
5000 psi, 325 degree, high pressure double seal swivels, reels equipped for 3/8" hose but can easilty be converted to 1/2" with 1/2" swivel, 2 year warranty
 
I have some of those, and be honest with you... I really liked them alot.

HOWEVER... I like the stackable titan hose reels EVEN BETTER
 
Here is mine that I just put on the truck a few weeks ago.
Truck hose.jpg

Have only had a chance to use it once so far and it was nice. I ordered this one specific due to the swivel locking base to make life way easier when rolling the hose up. There are 2 swivels on this reel, one at the reel, another on the bottom, they are rated really high PSI and Temp so I have high hopes on them, but time will tell.
 
Benjamin said:
Here is mine that I just put on the truck a few weeks ago.
View attachment 28509

Have only had a chance to use it once so far and it was nice. I ordered this one specific due to the swivel locking base to make life way easier when rolling the hose up. There are 2 swivels on this reel, one at the reel, another on the bottom, they are rated really high PSI and Temp so I have high hopes on them, but time will tell.
Click to expand...

I like that height it sits at not too high but over the side of the bed.
 
Its actually raised and bolted down to some 2x4's. The 2x4's are bolted to the burner via an angle iron, and also connected and bolted to the floor of the box. I didn't want the reel to leave the truck going down the highway and wanted to make sure of that. The 5 gallon fuel tank fits underneath perfectly, the height is also perfect as its no taller then the cab so driving into parkades are no problems.
 
Benjamin said:
Here is mine that I just put on the truck a few weeks ago.
View attachment 28509

Have only had a chance to use it once so far and it was nice. I ordered this one specific due to the swivel locking base to make life way easier when rolling the hose up. There are 2 swivels on this reel, one at the reel, another on the bottom, they are rated really high PSI and Temp so I have high hopes on them, but time will tell.
Click to expand...

That is an interesting rig, any more pics?
 
Here is the truck, no perfect but it all fits and does what it needs to.
IMG-20140815-01015.jpg

Tank is 270 UK gallons, engine is a 21 hp briggs with a 6.5 year old cat 5cp 4.5 gpm pump that doesn't want to quit. Generator is for the burner/anything else 120v yamaha 2000 inverter, burner is a hydrotek that is 6.5 years old as well. I can do about 2-2.5 hours of washing with this setup before I run out of water. I mostly use it for parkades and blowing out rads on heavy equipment.
 
You must log in or register to reply here.
Back
Top