HD 80 Results

Aplus

Member
I just stripped a 450 sf deck with lots of lattice yesterday. It had two coats of CWF-UV, and was pretty nasty.

I mixed up a batch of HD-80, mixed at 8oz per gallon of water. I sprayed it on with a pump sprayer, and let it dwell about 10 minutes. It was about 60 degrees out.

I was shocked to find that the CWF litterly melted off the surface!

I think the mix was a little hot for the railings, because I did get some furring on them.

Never-the-less, I would highly recommend HD80, because I have never used a product that removed CWF so fast, and complete.

Granted it is kind of a hassle to make up the mixes, and I did have a little problem with incomplete dissolving of the crystals. A couple times my sprayer tip plugged up, and I had to unscrew the end, and tap out the clog. A small price to pay for such fabulous results.

HD 80 will always be in my trailer from now on. Sure, I'll use other strippers on certain occasions (lighter duty), but it is nice to know I have a product that will probably work on everything. No more struggling with 3-4 applications of Wolmans anymore.

Thumbs UP !!
 
Thanks for sharing Tony!
:)
Beth
 
Thanks Tony!

HD-80 is 100% active. If you had undissolved powder try cutting back on your measurements a little. 1 gallon of water will dissolve 8 oz of HD-80 into solution. Any more than 8 oz will remain undissolved. If you don't feel like tweaking you measurements you can always pour the material through cheese cloth to strain out the excess.

Best of Luck

Russell Cissell
 
Back
Top