Downstream Injectors

extream, i hope you mean 4 to 1
4 gal of water to 1 gal of chem. that's a 20% draw.
A 5 gal per min unit with the best e-spec downstreamer should draw 1 gal plus 1 qt [5 qt's] per min.
Less if you run over 150 ft of pressure line and dont move the downstreamer closer to the wand.
Another question. Do you think if you were to try 2 downstreamer's on one pressure line, would you space them with a jumper line or connect them together?
 
Worked Great!

John Orr,

I was actually running through 50' of chem line. I have 200' of HP hose w/ 50' of chem line to a 5g bucket. However, I just inserted the injector before the hose reel on Friday. I had to get used to the delay in clearing the hp hose of chem, but I had a great time leaving the bucket on the rig!!!! Thanks Justin and Ron!

This thread has turned out to be very informative. I appreciate the willingness of all of you to assist.

Take care

Ron
 
I use an adams, and yes, I did mean 4-1, (20%) I also run 300' of hp hose off my reel.
about using two injectors, that is a geat question, I will have to get another and give both ways a try and see what the outcome is. if it works, we will be able to throw away our x-jets, of maybe not, they do have their purpose.
 
You must log in or register to reply here.
Back
Top