Mike Sullivan
New member
Bob at www.pressuretek.com has the new 12V Delavan 5.3gpm 60psi pumps on sale until Wednesday.
I just bought 2 of them.
Good Move!
Are you gonna parallell them Mike ?
If so, there are two things you can do ?
One is to turn up the pressure a bit on each pump.
I am told they will go up to 100psi, but I would be conservative and run em at 80PSI each pump.
If you do turn em up, try and get the pressure the same on each pump /
Second thing is to go to 3/4 Hose if you want to run them stock at the 60PSI setting.
60 PSI is not a whole lot to "push" the combined flow of TWO Delevan pumps,and the larger 3/4 hose will help preserver that pressure.
My choice would be to simply crank em up to 80 psi, and use the 5/8 hose.
Try em stock first, then only go up on pressure IF you have to.
I just bought 2 of them.
Good Move!
Are you gonna parallell them Mike ?
If so, there are two things you can do ?
One is to turn up the pressure a bit on each pump.
I am told they will go up to 100psi, but I would be conservative and run em at 80PSI each pump.
If you do turn em up, try and get the pressure the same on each pump /
Second thing is to go to 3/4 Hose if you want to run them stock at the 60PSI setting.
60 PSI is not a whole lot to "push" the combined flow of TWO Delevan pumps,and the larger 3/4 hose will help preserver that pressure.
My choice would be to simply crank em up to 80 psi, and use the 5/8 hose.
Try em stock first, then only go up on pressure IF you have to.
Last edited by a moderator: