Beckette Burn giving me a fit

C

ccobb

New member
Ok the problem is my burner on my mi-t-m hw skid will not light. Ok the blower works but not getting any fuel so I thinking a fuel pump, get a new fuel pump same problem. belt is tight on gen, Yes it has fuel. It is a 120 v burn, I'm lost. HELP!!!:shout:
 
did you check the filter
 
has a racor filter, drained it, but it will not fill on its own. Filled the filter tried again no luck, checked fuel line, all clear
 
no, I was thinking cloged fuel nozzle, but i have taken the line off from the fuel pump to side of the blower no fuel
 
Wow Russ makes after hours calls. Got a call from Russ about 30min ago, quick 2 min talk and I should be up and running. Thanks Russ!!! u da man!!!
 
There is a plastic cog and shaft that goes from the blower motor through to the fuel pump. Make sure it is there and spinning the pump. If you disconnect the line and run it, does fuel flow (be careful testing!)?
 
There should be a bleeder port looks like a brake line bleeder on the fuel pump. if you loosen it fuel should start to come out.
 
After the talk I left out the allen screw in the plug for bypass line, going to try it in the morning and let everyone know
 
ccobb said:
After the talk I left out the allen screw in the plug for bypass line, going to try it in the morning and let everyone know
Click to expand...

I am going through smilar problem. I will post later some interesting experiments, images and videos for education purposes. And let somone say, I didn't contribute to the industry... :)
 
CHeck the fule lines for a clog if the pump isnt filling ur glass bowl my guess would be the pump
 
You must log in or register to reply here.
Back
Top