Connecting Two High Pressure Hoses...

Thanks for the info Dan.

I have had good luck with the Delavan, FloJet and Shurflo but I got a pump from Paul at the pressurewash store and will be installing it on the trailer for spraying chemicals. I don't know the brand but it is what Paul puts into the soft wash rigs he sells so it is probably a great pump.
 
Thanks for the info Dan.

I have had good luck with the Delavan, FloJet and Shurflo but I got a pump from Paul at the pressurewash store and will be installing it on the trailer for spraying chemicals. I don't know the brand but it is what Paul puts into the soft wash rigs he sells so it is probably a great pump.

Ive read great things about the powerwash stores soft wash system, everyone seems to love them. To be honest I built one very identical off watching all their videos they have posted, but at a huge fraction of the cost by piecing everything together over time and updating here and there to my needs. I gotta say I love my soft wash systems and has never let me down.
 
Where do you get them?

I have a 300 ft single piece with a 50 ft leader. I have been lucky and they have always lasted a very long time, really hard to find 300 ft in half inch though.

The standard quick connects have the biggest opening I think. Those euro 22 mils seem cool the way they thread together but the opening is smaller.
 
Not a dumb question at all. This thread proves it. 40-plus replies and lots of good tips.

Here's how I'd sum it up for a newer guy:

  • Quick connects between sections are fine. They're fast, and you can pull out a blown section and keep working, like Pat said.
  • Keep spare O-rings on the truck. They are the weak spot.
  • If the hoses stay together most of the time, a pipe coupler is cleaner on the reel. Russ's point is a good one.
  • Put a swivel at the gun. You don't need one between hoses.
  • Make sure every fitting is rated for your machine's pressure.
  • Wipe and oil your fittings now and then. It keeps them from seizing up.
  • Before you roll it up, lay the fitting flat with the reel so it doesn't chew the O-ring.

Use the shortest hose that does the job. More hose means more pressure drop at the gun, so don't drag 300 feet when 150 will reach.

Ron Musgraves
 
Back
Top