Injector not sucking

Chazz

New member
My injector is not sucking chemicals. I realizes that the top of the plastic piece that goes in the bucket was missing and that little piece inside was gone. I replaced my injector and bought a piece of the tube end at home depot but it still won't suck. I can hear the air going through the hoseI have it installed right before the hose reel attached to a super swivel If it was sucking should I be able to feel the suction with my finger on the nozzle that the chemical hose attaches to?
 
Sounds like ur chemical line might be sucking some air.... i would put a zip tie on the hose around the barb fitting thats how mine is setup

Sent from my DROID RAZR using Tapatalk 2
 
I was going to say that if they are on backward they will not work. When the injector is working you should feel the suction with your finger.

If is an older one you may have dissolved the spring inside if you used a lot of bleach or acid. The spring will keep the check ball from going all the way up when sucking chem and blocking the inlet port. If this is the case you will need a repair kit to fix it or just replace it for a few dollars more.

Chemical Injectors Design and Function:</SPAN>

Downstream chemical injectors work by means of the venturi principle. This principal states that when water is forced through a restricted area without the volume changing its velocity will increase and it will create a low pressure zone. In a chemical injector a restrictive nozzle is placed just in front of a cavity. When the water flows freely across the cavity without any backpressure it creates an area of low pressure that sucks in the chemical through the inlet barb. This vacuum is strong enough to both draw the chemical and lift the check ball that is in the barb to prevent the backflow of water.</SPAN>

injector under draw.JPG</SPAN></SPAN>

When the injector is placed in a high pressure mode the back pressure created by the nozzle fills the cavity after the restrictive orifice and eliminates the area of low pressure. With the area of low pressure eliminated the check ball is seated against the o-ring making a water tight seal and eliminating backflow.</SPAN>

</SPAN></SPAN>injector no draw.JPG
 
Make sure your injector is going in the right direction. We like to put them in backwards every once in awhile.
Im Guilty. and damaged one when I found the problem. (do not over tighten)
 
Yup, I flipped it and had the arrows pointing to the sky, it didn't look right to me but it's working nowThank you so very much, you guys are awesome!!!!!!
 
I was going to say that if they are on backward they will not work. When the injector is working you should feel the suction with your finger.

If is an older one you may have dissolved the spring inside if you used a lot of bleach or acid. The spring will keep the check ball from going all the way up when sucking chem and blocking the inlet port. If this is the case you will need a repair kit to fix it or just replace it for a few dollars more.

Chemical Injectors Design and Function:

Downstream chemical injectors work by means of the venturi principle. This principal states that when water is forced through a restricted area without the volume changing its velocity will increase and it will create a low pressure zone. In a chemical injector a restrictive nozzle is placed just in front of a cavity. When the water flows freely across the cavity without any backpressure it creates an area of low pressure that sucks in the chemical through the inlet barb. This vacuum is strong enough to both draw the chemical and lift the check ball that is in the barb to prevent the backflow of water.

View attachment 20879

When the injector is placed in a high pressure mode the back pressure created by the nozzle fills the cavity after the restrictive orifice and eliminates the area of low pressure. With the area of low pressure eliminated the check ball is seated against the o-ring making a water tight seal and eliminating backflow.

View attachment 20880



Thanks Paul,

I always wanted to know what happens inside of there.
 
Back
Top