x-jet set up
- Thread starter MARK W.
- Start date
Slim Pickens
New member
X-Jet Set up
Mark What I do is get a 5 Gal Container From a detail automotive supplier
one that has a screw top and drill a hole in the top the size of the tubing. Then take the filter off slide the tubing through put filter back on screw top
and that should help you from kicking the container hope this will help you.
Jim
Quality Cleaning contractors
Mark What I do is get a 5 Gal Container From a detail automotive supplier
one that has a screw top and drill a hole in the top the size of the tubing. Then take the filter off slide the tubing through put filter back on screw top
and that should help you from kicking the container hope this will help you.
Jim
Quality Cleaning contractors
Mathew Johnson
New member
I mix 35 Gallons of house wash at a time and I pump it to my X Jet off of my trailer with a shureflow on demand pump. I have a hose reel with 200 feet of X-Jet tubing. I pull that line with my pressure hose line. It works well.
Mike Hughes
Former Board Administrator
If i had one of those covered containers, I would have saved a life!
This summer, we washed a house with a pretty good sized fish pond near the home. I covered the pond to keep the x-jet's overspray out of it......
The pond was close enough to the home that we had to stand right next to the pond in order to properly spray the house. A frog jumped out of the pond and right into our bucket of cleaner...........and prompty died. One of those moments that's both sad and funny at the same time.......
This summer, we washed a house with a pretty good sized fish pond near the home. I covered the pond to keep the x-jet's overspray out of it......
The pond was close enough to the home that we had to stand right next to the pond in order to properly spray the house. A frog jumped out of the pond and right into our bucket of cleaner...........and prompty died. One of those moments that's both sad and funny at the same time.......