Tire Marks on curbing

where did you get the carb cleaner?


I have bought carb cleaner at most of the auto parts stores like Auto Zone, O-Reilly's, Napa, Car Quest, etc.....

I have bought some at Wal Mart also.

I have not had the luck with it on a lot of things that people have discussed here like on graffiti and tire marks but it might be the area, what is being cleaned or even the brand of carb cleaner that is what makes the difference.
 
I can usually get them cleaned with heat and pressure, but on the drive thru curves, it didn't get the deep tire marks. The carb cleaner got the rest out. Only used 1/2 can at $3.50.

10-4 I thought it was a large area.
 
It all depends on how much time you have for the job, but I've found curb tire marks usually get cleaned out naturally after you've loosened them up. Or at least get faded enough. The real problem can be parking lots for me, where asphalt gets really hot and you got cars making sharp turns all the time. Never had to deal with a drive through, but it's probably the same sort of problem! The tire residue just melts into the floor.
 
Tire marks on curbs and drive-thru turns are some of the toughest stains we chase.

Like Squirtgun said, the rubber gets pushed into the pores of the concrete. Some of it is not coming out, and you need to say that before the job, not after.

  • Pre-treat with a degreaser and give it dwell time. Do the flatwork, then come back to the curbs like MHasterok does.
  • Hot water makes a big difference on rubber. Heat and dwell beat more pressure.
  • Be careful with a turbo nozzle on curbs. You can etch the concrete and leave a worse mark than the tire did.
  • Test any solvent or acid on a small spot first and follow the label. Keep it out of the storm drain.
  • Take before and after photos of the worst spots.

Tell the property manager up front: "We'll lighten them a lot, but the deepest marks may not come out 100%." That one sentence saves you a callback and keeps the account.

Ron Musgraves
 
Great advice
 
Back
Top