Solopressure washer
New member
What is up with the water coming out between the shell and the top of the brushes. Had a bit to much snot( great surfactant).https://youtu.be/z6ukI00d2KE
Thanks You sir. Running 10GPM. I went with the whisper wash as it is highly recommended and I posted a thread a while back now on modification to the whisper wash for bogging down. Funny how the hammer head has those cuts in the brushes. I was under the impression it was other equipment concerns. Be cutting more than turkey on Thursday to get ready for Friday. Thanks again Ralph, have a good Turkey day and the same to all others!That happens to me 7-8 time a day! What GPM are you running Randy? The guy at whisper wash recommends cutting some bristles off of the skirt for 10 gpm machines to let the water out faster or the bar bogs down because it is water logged.
I have 2P/W hooked together. A 5 GPM that is under driven and a 4 GPM. I loose pressure due to the under drive but the volume with the right chems make all the difference. now have 3 surface cleaners, 1 for 10GPM at around 2200 psi and another for 4 at 4000 I use for the pressure and heat. The 3rd I found on the side of the road and with new handles and a new trigger it is a back up. That job was a 150 foot pull adding to a bit more pressure loss as you know. I have thght about going to a larger S/C but not sure if my pressure would spin one. I was also trying a new video camera on this job and for 50.00$ plus a memory card it worked well. Hooks to the handles on the S/C. With chems and rinse it was a 13min driveway....I would think it would be hard to hold that from flying in the air with 10gpm in the classic. Sure can move it fast and do a good job.
I have 2P/W hooked together. A 5 GPM that is under driven and a 4 GPM. I loose pressure due to the under drive but the volume with the right chems make all the difference. now have 3 surface cleaners, 1 for 10GPM at around 2200 psi and another for 4 at 4000 I use for the pressure and heat. The 3rd I found on the side of the road and with new handles and a new trigger it is a back up. That job was a 150 foot pull adding to a bit more pressure loss as you know. I have thght about going to a larger S/C but not sure if my pressure would spin one. I was also trying a new video camera on this job and for 50.00$ plus a memory card it worked well. Hooks to the handles on the S/C. With chems and rinse it was a 13min driveway....
I would think it would be hard to hold that from flying in the air with 10gpm in the classic. Sure can move it fast and do a good job.
What is your pressure?I have an ankle weight attached with velcro on the cover. If I didn't it would be 3 feet off the ground
with 10 feet of hose 3000 psi. With 200 feet of hose, 2300.What is your pressure?
Chris - will do as I modify the brushes.