reground to block front block right side under flywheel. removed solenoid cleaned up the contacts. goofed the install on the solenoid. How do I reattach the solenoid to the starter fork? Not sure if the fork catch assembly retracts then extends when energized? Applied power key off before realizing the solenoid and starter weren't in contact--- machine got power but up to the solenoid but couldn't engage - but the key was off. Also the solenoid got powered in the key off position. So the big thing now is the starter fork and solenoid seating properly then I can move on. From the original problems leads getting hot, sparking and dunk dunk sound have stopped but possibly still there. I'm thinking either a bad starter or kill switch, but I'm a crappy mechanic