dual adjustable chemical injector 5-8gpm?

Sunbrite has one, so does envirospec. You can get a brass or stainless and they have a ball valve or 3-way ball valve so you won't cross contaminate. The dual is mainly for mixing chem like bleach in one side and soap in the other. Other wise you can just use the 3-way.
 
I haven't even seen a need in my work to have an adjustable injector. I only use the fixed kind and only want it to pull at full strength. If I want a weaker mix to hit the surface, I will just add more water to my chemical tank or bucket. Seems like the adjustment part of the injector is just another thing that can quit working.
 
HighTide said:
I haven't even seen a need in my work to have an adjustable injector. I only use the fixed kind and only want it to pull at full strength. If I want a weaker mix to hit the surface, I will just add more water to my chemical tank or bucket. Seems like the adjustment part of the injector is just another thing that can quit working.
Click to expand...

+10 I also have not had a need for adjustable injectors, they don't pull as strong as the regular type, another thing to wear out or break and you can't make the chemicals stronger, only weaker. I would rather weaken something than waste chemicals by diluting them and finding out that they are not strong enough to do the job.

As for the dual barb inlet or dual inlet, just get a "T" and put some ball valves on the hoses to switch or get a remote system to switch from far away.
 
Thanks guys! The one at Envirospec is perfect for what I need it for.I am not wanting to mix soap and wax together and did not want to add a T and valves to one injector.Also with car wash soap I need to be able to meter it down @ about 70:1.I am adventuring into the fleet wash and detail side of things.
 
If you found a soap that actually works at 70:1 without brushing then buy a lot of it before they start watering it down, most of the soaps out there won't do anything at that ratio unless you are brushing a lot. Good Luck.
 
outdoorprowash said:
I have one and it suck! haha Mine is adjustable and I don't trust the adjustment on it but that is just me. I might prefer a metering valve instead. I just mi my chem and leave it wide open.
Click to expand...
Same..... Tried both. I like the super suds sucker. After a little experimentation you can dial in your mix then let the injector do it's stuff.
 
You must log in or register to reply here.
Back
Top