TRISODIUM PHOSPHATE (ANHYDROUS) ICSC: 1178
Date of peer-review: October 1995
Sodium phosphate, tribasic
Trisodium orthophosphate
CAS # 7601-54-9 Na3PO4
RTECS # TC9490000 Molecular mass: 163.9
UN #
EC #
TYPES OF HAZARD / EXPOSURE ACUTE HAZARDS / SYMPTOMS PREVENTION FIRST AID / FIRE FIGHTING
FIRE Not combustible. Gives off irritating or toxic fumes (or gases) in a fire.
In case of fire in the surroundings: all extinguishing agents allowed.
EXPLOSION
EXPOSURE
AVOID ALL CONTACT!
Inhalation Burning sensation. Cough. Shortness of breath. Sore throat.
Local exhaust or breathing protection.
Fresh air, rest. Half-upright position. Refer for medical attention.
Skin Skin burns. Pain. Blisters.
Protective clothing.
Rinse with plenty of water, do NOT remove clothes. Refer for medical attention.
Eyes Redness. Pain. Severe deep burns.
Face shield or eye protection in combination with breathing protection.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
Ingestion Abdominal pain. Burning sensation. Shock or collapse.
Do not eat, drink, or smoke during work. Wash hands before eating.
Rinse mouth. Do NOT induce vomiting. Give plenty of water to drink. Rest. Refer for medical attention.
SPILLAGE DISPOSAL PACKAGING & LABELLING
Sweep spilled substance into containers; if appropriate, moisten first to prevent dusting. Carefully collect remainder, then remove to safe place (extra personal protection: complete protective clothing including self-contained breathing apparatus).
EU Classification
UN Classification
EMERGENCY RESPONSE STORAGE
Separated from strong acids. Dry. Well closed.
IPCS
International
Programme on
Chemical Safety Prepared in the context of cooperation between the International Programme on Chemical Safety and the Commission of the European Communities © IPCS, CEC 2001
SEE IMPORTANT INFORMATION ON BACK
TRISODIUM PHOSPHATE (ANHYDROUS) ICSC: 1178
IMPORTANT DATA
PHYSICAL STATE; APPEARANCE:
COLOURLESS TO WHITE CRYSTALS.
CHEMICAL DANGERS:
The substance decomposes on heating producing toxic and corrosive fumes including phosphorous oxides. The solution in water is a strong base, it reacts violently with acid and is corrosive. Attacks many metals in presence of water.
OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.
ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation, through the skin and by ingestion.
INHALATION RISK:
Evaporation at 20°C is negligible; a harmful concentration of airborne particles can, however, be reached quickly when dispersed.
EFFECTS OF SHORT-TERM EXPOSURE:
The substance is corrosive to the eyes, the skin and the respiratory tract. Corrosive on ingestion. Inhalation of dust may cause lung oedema (see Notes).
PHYSICAL PROPERTIES
Melting point (decomposes): 75°C
Relative density (water = 1): 2.5
Solubility in water, g/100 ml: 8.8
ENVIRONMENTAL DATA
NOTES
The symptoms of lung oedema often do not become manifest until a few hours have passed and they are aggravated by physical effort. Rest and medical observation are therefore essential. Immediate administration of an appropriate spray, by a doctor or a person authorized by him/her, should be considered.
ADDITIONAL INFORMATION
LEGAL NOTICE Neither the CEC nor the IPCS nor any person acting on behalf of the CEC or the IPCS is responsible for the use which might be made of this information
© IPCS, CEC 2001
See Also:
Toxicological Abbreviations
