Plumbing

[A-OK Pressure]

I have a 275 water tank I would like to use in my enclosed trailer. Does anyone have any pictures of there plumbing so I can get some ideas as to how to lay mine out? Or if you could direct me to a site that might have some ideas.

Thanks
Attila

 

[chrisduffy543]

There should be some good threads on this go to search and look up plumbing or something like that and they should pop up.

 

[Russ Johnson]

Tote tanks usually have 2" male pipe thread on the outlet.
Go to Home Cheapo. Get PVC pipe:
1 - 2" FPT X 2" female slip
1 - 2" male slip X 3/4" FPT bushing
1 - 3/4" MPT hose barb in brass or nylon

 

[A-OK Pressure]

Tote tanks usually have 2" male pipe thread on the outlet.
Go to Home Cheapo. Get PVC pipe:
1 - 2" FPT X 2" female slip
1 - 2" male slip X 3/4" FPT bushing
1 - 3/4" MPT hose barb in brass or nylon

Thanks Russ,

I put it all together. filled the tank up, bled all the air out of the system. And evrything worked fine. I shut the machine down because I had to scrubb the gutters by hand. When I fired it back up the water would not flow on it's own. I had to disconnect the high pressure hose and start the machine. when I did this the water flowed and I had no problems until the next time I shut it down. What could be causing this?

Thanks
Attila

 

[Russ Johnson]

Hold the gun open when you shut it off so it doesn't stop in bypass. If that doesn't work, you may need to switch to a seperate unloader / inlet assembly. Could possibly be worn inlet seals, too.