O-ring in injectors

C

Chris Tharpe

New member
Does anyone know the size of the O-ring inside an injector specifically the high-draw from General pump? When our injectors go out its never the spring or ball only the o-ring is damaged or worn out so I am hoping to buy those in bulk and a few springs and balls as we get low on stock
 
I ordered one of those and I'm almost hoping that my last standard injector dies. I guess I could play with it while the other one is still working but that's not sporting.
:flirt:
 
offdutyfireman said:
My local Landa guy sell the ball, spring, and oring for 5 bucks. I am sure you local guy carries them. By Bob's injector and you won't ever have to change them out again. No spring to press the ball against the oring.
Click to expand...

William, how long have you been using that injector? If I remember right it is like a year or longer now with no problems?

You use that with house washing so it sees bleach and other chems?
 
He sent me one to try that lasted about 6 months. SSS lasted about a month. I went from buying 36 SSS a year at anywhere from 40 to 75 apiece to 12 of Bob's at 25 apiece. I have 6 machines and go thru about 5 drums of bleach a week so roughly 55 gallons of bleach a week for 6 months, so 330 gallons of bleach cut three to one= 1,000 gallons of chems thru the injector in it life span. That is good to me. Then it is just a matter of replacing the barb from the new injector and putting it on the old one. Not knocking Espec, and I love Paul, but the prices never stayed the same and the S/H have gone back to the old ways. I just bought two small balves for $53.32 and paid $22.84 for S/H. Drives me crazy.
 
That is some good foaming, it sticks but does not look too dry and has a good dwell time.

Is that with a pressure washer or the keg foamer or other system?

Thanks.
 
offdutyfireman said:
He sent me one to try that lasted about 6 months. SSS lasted about a month. I went from buying 36 SSS a year at anywhere from 40 to 75 apiece to 12 of Bob's at 25 apiece. I have 6 machines and go thru about 5 drums of bleach a week so roughly 55 gallons of bleach a week for 6 months, so 330 gallons of bleach cut three to one= 1,000 gallons of chems thru the injector in it life span. That is good to me. Then it is just a matter of replacing the barb from the new injector and putting it on the old one. Not knocking Espec, and I love Paul, but the prices never stayed the same and the S/H have gone back to the old ways. I just bought two small balves for $53.32 and paid $22.84 for S/H. Drives me crazy.
Click to expand...

Thanks for the info William.
 
offdutyfireman said:
My local Landa guy sell the ball, spring, and oring for 5 bucks. I am sure you local guy carries them. By Bob's injector and you won't ever have to change them out again. No spring to press the ball against the oring.
Click to expand...

the pressure tek site show a general pump fixed injector and a Adams adjustable injector. Which one are you talking about?
 
bears said:
the pressure tek site show a general pump fixed injector and a Adams adjustable injector. Which one are you talking about?
Click to expand...

It is not in the store, you have to call Bob and order it from him.
 
Carey, did you ever get some pictures of the truck in your signature? If so, please email me some, I would like to see that truck up close.
chris969@swbell.net

I am thinking of setting up a truck similar to that.

Thank You.
 
bears said:
the pressure tek site show a general pump fixed injector and a Adams adjustable injector. Which one are you talking about?
Click to expand...

You have to call and give the secret password.
It's "p0ny".
 
You must log in or register to reply here.
Back
Top