Espec - Blaster 06.05.09

homer

Equipment Sales
Do you want to receive the Weekly Blaster in your Mail Box?
or would you like to see the attachments on this post?
Go to http://www.envirospec.com
and enter your e-mail address for the E-Mail Specials
You can also e-mail soap4hope@envirospec.com and we will send you this Blaster along with all the pictures.

Here are just a few things you will always get 'first shot' at...


THE ALLISON CYCLONE SYSTEM
The Roof Cleaners Dream Machine
Hi-Volume Chlorine Flood Pump

Regular Price $2,795.00
This Month - $1,695.00
Cart or Base Plate
Comes with 20 of 1-1/4 plastic reinforced clear inlet feed line and 20 of 3/4 soft-flex return line and clamps.
The operator can throttle the amount of chemical flow and adjust the pressure in seconds.
Single or two gun operation is standard and 4 gun operation is possible with the addition of two more valves.
The durable Cyclone pump is constructed of chemical resistant components that will give
the operator years of trouble free service when properly maintained.
Ë Gear Driven Diaphram Pump Ë Adjustable Pressure Regulator Ë Manual Dump Lever Ë Dual Ball Valve Outlets
Ë Pressure Gauge Ë Can be Run Dry Ë Self-priming Ë Large Capacity Oil Bath Ë Quick Drain Oil Plugs
Ë Chlorine & Caustic Ready Ë 316 Stainless Bolts Ë All Stainless and Polypropylene Liquid Handling Parts
Ë Single to Four Gun Operation Ë 6 HP Kohler Industrial Engine Ë Low Oil Engine Shutdown
Ë Hose & Lance Assembly Sold Separately
______________________________________
TS-2021 GENERAL PUMP
This is the REAL TS-2021
with the nickel plated head
5.6 GPM @ 3,500 PSI


MFG. LIST PRICE $1450.00
Limited Quantities for $395.00
___________________________________
13 HP ZONG SHEN INDUSTRIAL ENGINE

REPLACE THAT WORN OUT HONDA
with this incredible bargin.
While Supply Last - Only 8 Available!
We ran this engine under load at 4 GPM & 3500 PSI
for over 100 hours non-stop and it performed flawlessly!
$239.95
___________________________________
DUAL PUMPER SYSTEM
30 Horsepower Kohler Engine
with 25 Amp Recharge
1 Gun at 3200 PSI AT 10 GPM
OR
2 GUNS AT 5 GPM RUNNING 3200 PSI EACH

List Price $9,995.00
Typical Professional Discount $7,495.00
BUY NOW FOR
$4,995.00
OFFER EXPIRES 6-30-2009
ONLY 5 AVAILABLE AT THIS PRICE
(RED FRAMES)
(shown with optional heaters that can be added later and optional 40 HP Kohler)
_______________________________________________________
KOHLER ENGINE
PRE-ARRIVAL SALE
18 HP, Electric Start, Top Mount - Oil Filter Side Muffler

HOT WATER READY - with a 20 AMP Recharging System

Regular Price $1527.00
Now $899.00
This is an engine that we will be using for our new line
of pressure washers that you will find in our catalog at
http://www.envirospec.com
In order to be competitive we had to purchase a huge amount of these engines.
We are making a limited quantity available at almost COST in order to free up space.
This is a Pre-Arrival Sale which means you purchase your engine now
and when they arrive from Kohler it will be shipped to you.
Kohler is telling us to expect these engines in between
the 15th and 31st of July, 2009. (maybe sooner)
_______________________________
BRIGGS ENGINE
In Stock - Ready to Ship
18 HP, Electric Start and Auxillary Recoil Start, Low Mount Muffler
HOT WATER READY - with a 20 AMP Recharging System

Regular Price $1203.00
Now $899.00
_____________________________________
ALLISON IRON HORSE SUPER SKID
SUPER HOT WATER
18 HP BRIGGS, TS2021 PUMP, 3500 PSI @ 5.6 GPM

List Price: $7,995.00
Our Contractor Price: $5,495.00
Now $3,995.00 Vertical Coil
$4,195.00 Horizontal Coil (shown)
(Shown with optional Honda Engine - offer expires at 5 PM on 6/30/09)
_______________________________
INCREDIBLE BUY!
ALLISON IRON HORSE
COLD WATER PRESSURE WASHER
18 HP BRIGGS, 3500 PSI @ 5.6 GPM, Gear Drive System

Configuration #1
18 HP Vanguard Engine, Pump, Gear Drive Transmission, Unloader
(This is one that you can bolt down to the floor of your vehicle - 4-bolts will attach gear to engine)
GUN, LANCE, HOSE, INJECTOR, NOZZLES SOLD SEPARATELY
List Price: $3,495.00
Our Contractor Price: $2,695.00
Now $1,550.00

Configuration #2
18 HP Vanguard Engine, Pump, Gear Drive Transmission, Unloader on Cart
(This is one that is completely assembled on a rugged 2-wheel cart)
GUN, LANCE, HOSE, INJECTOR, NOZZLES SOLD SEPARATELY
List Price: $3,995.00
Our Contractor Price: $2,995.00
Now $1,750.00

Configuration #3
18 HP Vanguard Engine, Pump, Gear Drive Transmission, Unloader on Base Plate
(This is a complete unit on a base plate that will bolt down to the bed of a truck or trailer)
GUN, LANCE, HOSE, INJECTOR, NOZZLES SOLD SEPARATELY
List Price: $3,795.00
Our Contractor Price: $2,795.00
Now $1,690.00

Configuration #4 with 4-Drive Belts
18 HP Vanguard Engine, Pump, Belt Drive, Unloader on Cart
(This is one that is completely assembled on a rugged 2-wheel cart)
GUN, LANCE, HOSE, INJECTOR, NOZZLES SOLD SEPARATELY
List Price: $4,195.00
Our Contractor Price: $3,195.00
Now $1,795.00
___________________________________________
DON'T MISS...
THE 'UP-COMING' ROUND TABLE, EQUIPMENT EXPO AND CONVENTION
June 18-19, 2009 - EnviroSpec Contractor Round Table in Wisconsin
Anyone can show you how to spray soap on something and rinse it off; at Envirospec we want to show you how to organize and run a successful business. We will have enrolled some of the finest industry experts to show you how to setup your company for success and methods to save on your bottom line. The networking and years of experience in the room will be some of the best information you will ever find...ANYWHERE!
Cost per person $50.00
We are limiting enrollment to 75 people and the fee includes lunch and a snack on both days of the meetings.
Part # RT0609
Topics Include:
• Selling fleet washing-What is important to a corporate fleet manager.
• Choosing the right insurance and proper coding to save money.
• Environmental procedures and treatment processes.
• Industry experts panel Q&A.
• Bidding procedures and form design.
• Selling to property managers-How to get business and keep it.
• Selling add on services.
• Equipment setup and design.
• Product testing &
and much much more....
Event Location:Radisson Hotel Milwaukee North Shore
7065 North Port Washington Rd
Glendale, WI 53217

414-351-6960
A block of rooms have been reserved on site at a discounted rate of $89.00 per night (regular rate $150.00). This discounted rate is available until 6/1/09 and then will only be offered if rooms are still available. When making reservations be sure to mention that you are part of the Envirospec group and ask for the discounted corporate rate.
http://www.radisson.com/milwaukeewi_north Several other hotels are available in the area as well.
Every attendee will receive well over $150.00 worth of free items and discounts so don't miss your opportunity to attend!


October 16-17, 2009 - 2010 MODEL YEAR EQUIPMENT EXPO - Jekyll Island, GA
3-hours from Orlando and the UAMCC Convention the next weekend.

As many of you know Allison Iron Horse & EnviroSpec builds some of the most exotic, most professional and powerful pressure wash equipment in the world. This will be an opportunity for you to touch and feel this incredible equipment and learn about the many industries that need the services of contractors who own such equipment.

At the EXPO we (including you) will be building a Dual Pumper. You will pick up tips and learn installation techniques that will help you with your existing equipment. You will learn more at this event about equipment than you will on you own in the next ten years in the Mobile Wash Business. After this one event you will know more about pressure washers than the distributor who you are paying 'big buck' to keep your equipment running.

Also at the EXPO we will demonstrate the following equipment:
-The Dual Pumper Cold Water with 40 HP Kohler Gas
-The Dual Pumper with a 35HP Kubota Diesel and a 65 HP Kubota Diesel
-The Nitro Dual Pumper
-The High Volume Chem Induction System
-The Cyclone High Volume/High Velocity Chlorine/Chemical Sprayer
the following attachments will be available to test with this equipment:
-Allison High Induction Chem Induction System
-Flat Surface Cleaners
-Sewer Jetting Nozzles and equipment
-Telescoping Wands &and much more.

All the equipment, including the Dual Pumper you helped to build, will find it s way down the following weekend to the UAMCC Convention in Orlando, FL. This convention takes place from October 22 thru 25 (see below). This give you and your family a few days in between to visit Mickey and friends while you are in the Orlando area.

This will be a two day EXPO and will have an entry fee of $125.00 per person. We furnish two incredible meals per paid attendee at Latitude 31 Restaurant & Raw Bar. Drinks excluded. Please call Paul or Mike at 1-800-346-4876 for more info.


October 22-25, 2009 - UAMCC ANNUAL CONVENTION - Orlando, FL
The United Association of Mobile Contract Cleaners www.uamcc.org is pleased to announce that the UAMCC Assoc. will hold it's first annual convention in Orlando FL on Oct 22-25. The UAMCC convention will be one like no others in the past. As an attendee you can expect to learn, relax, network and have fun all at the same time. So leave your rigs at home and
pack up the family to attend the 1st Annual UAMCC gathering of pressure washing professionals! Our speakers include George Hedley, a nationally recognized speaker who's main focus is to help YOU grow your business. There will be an abundant of specialized experts from the pressure washing industry that will provide training sessions during the convention.
The Marriott Convention Hall in Orlando will be the site where you and your colleagues will speak one-on-one with the folks that supply you with the "stuff" that you need to be in this business. 30 exhibitors can and will showcase the newest and latest products, gadgets and equipment in the pressure washing industry. This convention will be like no other convention EVER. October is the perfect time to plan a family vacation in Orlando and it is also the perfect time to get equipped for the 2010 power washing season!
As an individual in the pressure washing industry YOU will experience cutting edge strategies that will work for your business. Taught by the experts with proven models of success!! It's time to dig into your business once and for all and erase those questions you have asked yourself for many years!! Candid and realistic advice will be on the AGENDA in Orlando!! For more information, please contact the UAMCC today at orlando@uamcc.org or visit our website at www.uamcc.org (This information provided by UAMCC)
 
Back
Top