Driving surface cleaner with full recovery ability

Ron Musgraves said:
Click to expand...

For that kind of money its a good machine. Belt driven bars is a step up but the cost would be higher. If you do Parking garages this type of machine is almost a must because fatigue factors on the half to a Million Plus square foot garages its time to go with the newest technology and this machine is high up there on the list of getting the job done in the least amount of time and because of that keeping your customers happy and the ultimate goal..... making more money for your family.

I'd like to see the reclaim set-up that is recommended to go with this machine.
 
That 40" driveable vacuum surface cleaner is going to change how people clean large areas of concrete AND........Stay EPA compliant.
 
John, the Sirocco 23hp system will work good with that surface cleaner.
 
Christopher said:
John, the Sirocco 23hp system will work good with that surface cleaner.
Click to expand...
I think for the Swabby I would need a much more HP Sorocco setup. I would need at least 400CFM's. I wonder what is the largest CFM machine he sells and what the price would be.
 
John, the 23hp system makes 450cfm so that would work good with the 40" vacuum surface cleaner or 2 of the 21" vacuum surface cleaners easily, maybe even 3 of the 21" vacuum surface cleaners.

I have a friend that is running 2 of the 21" vacuum surface cleaners with a system that makes only 245cfm and he has 100' of vacuum hose on each surface cleaner so the 23hp 450cfm system will be good for the 40" vacuum surface cleaner. Paul got the 23hp system and that is what he used for the demo and videos.
 
I get to sit down and clean... I have a Fury 2400 with the 24 hp motor, with a sirocco manifold on it. I run a 40 inch ride on surface cleaner, with a 40 inch deck, that uses a scrubber type squeegee on the back. It is very successful at recovering 95% of the waste water at 300 feet of hose. I tried the double shell design, and found that it required too much suction. The squeegee, for me, requires less suction.
 
Scott Stone said:
I get to sit down and clean... I have a Fury 2400 with the 24 hp motor, with a sirocco manifold on it. I run a 40 inch ride on surface cleaner, with a 40 inch deck, that uses a scrubber type squeegee on the back. It is very successful at recovering 95% of the waste water at 300 feet of hose. I tried the double shell design, and found that it required too much suction. The squeegee, for me, requires less suction.
Click to expand...

That's exactly what our local carpet cleaning rep puts together for cleaning tile floors and it works great. He makes them himself. He offered to make one for the Waterjet, said it would be a fun little challenge.
 
Clean County PW said:
I think for the Swabby I would need a much more HP Sorocco setup. I would need at least 400CFM's. I wonder what is the largest CFM machine he sells and what the price would be.
Click to expand...

It is on sale this month with $400.00 in additional discounts, total price with discounts is $7895.00

Largest standard system is:
Sirocco 550 cfm # SGV4-35


<TABLE class=store_display_item border=0 cellSpacing=0 cellPadding=0 width=90 align=left><TBODY><TR><TD align=middle>
Recovery_System-Engine_Sirocco_550_cfm_SGV4-35.jpg
</TD></TR><TR><TD align=middle><SMALL>View Larger Image</SMALL>


</TD></TR></TBODY></TABLE>
35 hp Vanguard industrial engine with electric start and low tone muffler
4007 Tuthill hi-lift vacuum blower for 550cfm’s
22" x 37" skid frame with vibration isolators
Hi-flow silencer system
2 ½ " x 5 ft. vacuum connect hose (hi-temp) with cam lock couplers.
Waste Tank system -2 each
D.O.T approved XHD 30gallon drum with slide-in filter
Sand blasted primed and hi-temp. powder coated
Auto pump out included

Vacuum Hoses-4 each
50 ft. x 2”i.d. crush resistant Xtra heavy duty with 2" end cuffs and cam lock couplers at the waste tank. (also available in 75ft or 100ft lengths)
SandSnake- 6 each
4 ft. long sand bags-30 mil plastic (you add the sand.) (Place end to end to corral wash water in parking lot application.)
VacuBerm- 2 each
4 ft. long, abrasion resistant PVC for wash water control Multiple VacuBerms can be connected together (Also available, 6 ft. version)
Silt Filter- 2 each
4 ft. long fiber pad to keep your Vacuberm from clogging with sand
Hard Surface Vac Wand-1 each
14" wide ”squeegee head” and replaceable squeegee blades
 
NJWashingGuy said:
Whats the price tag on that ?? Looks like a beast!
Click to expand...

The deck system with the 40" recovery deck and walk behind mower (with ride on platform) is on sale for $8995.00 till the end of the month regular price is $9545.00.
 
Scott Stone said:
I get to sit down and clean... I have a Fury 2400 with the 24 hp motor, with a sirocco manifold on it. I run a 40 inch ride on surface cleaner, with a 40 inch deck, that uses a scrubber type squeegee on the back. It is very successful at recovering 95% of the waste water at 300 feet of hose. I tried the double shell design, and found that it required too much suction. The squeegee, for me, requires less suction.
Click to expand...
Your welcome:)
 
;) yep, kory.gave me the idea, I did take it up a couple of notches.
 
That was funny! French fry holder. hahahahahahaha

That sounds like a great machine Scott! Hoping I can get to Phoenix when I can and when you have it is use so I can check it out.
 
You must log in or register to reply here.
Back
Top