Banjo to PVC?

[Roy Sanders]

Are the threads different between the two. I want to adapt my IBC totes to PVC supply line to my pump. Is there a different type that mates the two together or are they the same. Just wanting a screw on fitting.

 

[tomtucson]

IBC is its own thread but they make adapters.

 

[Christopher]

I have a tote that has some very strange threads, not standard pipe thread, coarse or fine thread, it is just different.

I was looking for a piece of rubber hose to clamp over the outlet of the valve and on the other side, over a piece of pvc with threads inside it so then I would have pipe threads and can plumb it to what I need.

 

[Paul Kassander]

Like mentioned the tote will have special threads. if it has the valve installed on the tote they are usually standard thread on the outlet.

 

[Chris Dubbs]

You can find the right ball valve for your tote with a little digging on the net. I think mine was around $53. If you have a brand name on the tote, that will help you start looking.


Sent from my iPad using Tapatalk HD

 

[Steven Button]

Here's some results on ebay that might help you start the search... http://m.ebay.com/sch/i.html?_nkw=T...m2428.l1313.TR0.TRC0.Xtote+pipe+thread+to+npt

 

[BrooksPW]

you could just put your own bulk head on it. that works too