9gpm Downstream options

[Steven Button]

can anyone recommend a downstream injector that would work well with a high flow (9pm) machine... most of injectors I've seen on distributor sites are rated up to 8gpm...

any suggestions - anyone have experience of downstreaming with high flow?

thanks again folks

 

[offdutyfireman]

SSS from envirospec. They have horrid customer service but good products. I use them on my 8 gpm machines

 

[Steven Button]

thanks william, I will look into that.

 

[DJ Carroll]

a 8 gpm should work if your running like 200 feet or more of hose (i couldn't imagine running any less than 200 for flat work)

 

[Russ Spence]

2.3 Orfice

 

[greg/sd]

steven call me sometime this week ill get you straightened out.

 

[Ron Musgraves]

Greg, come meet us

 

[Pwkid]

2.3 is what I use and I downstream 300 ft of hose with that oriface.

 

[greg/sd]

ron where you at.

 

[Ron Musgraves]

Magic Kingdom

 

[John Orr]

In a pinch, Northern Tool sells adjustable downstream injectors - 1.8, 2.1 and 2.3 - for about $20 to $25. I run 8gpm and have found that I like the draw better with the 1.8. I run 200' and 12.5 + "herbs and spices".

 

[pressurepros]

An injector rated for 8 gpm will actually give you a better draw rate. The only problem is, it restricts your flow when rinsing.