4 nozzles on Maxima 36" SC ??

A

Al Patterson

Member
Does anyone use a 4 nozzle spray bar on a maxima 36" surface cleaner

I was surprised to find out that to find out that you can not order a 4 bar nozzle system for the Maxima 36" surface cleaner. They only make a 2 bar with 2 nozzles at each end about 2" or so apart.
Have any of you guys ever used this....I am doubting the effectiveness of this set up.
I am running 11 gal min ...so GPM is not an issue.
 
I would think that they would offer a 4-nozzle spray bar for the larger surface cleaners, maybe the person answering the phone didn't know?

You might be able to drill and tap the other nozzle holes if you find out the spacing from someone that has one or take the bar to a machine shop and have them do it for you if you know the spacing for the other nozzles.
 
Christopher said:
I would think that they would offer a 4-nozzle spray bar for the larger surface cleaners, maybe the person answering the phone didn't know?

You might be able to drill and tap the other nozzle holes if you find out the spacing from someone that has one or take the bar to a machine shop and have them do it for you if you know the spacing for the other nozzles.
Click to expand...


Chris,

They do not make one. I have checked EVERYWHERE. :no:
 
I've got a couple the Maxima's with the double tipped bars. They are probably my favorite surface cleaners, very easy movement, wheels run really smooth in any direction and it clean pretty quickly if you have at least 8GPM. They seriously kick ass at 16GPM.
 
we have 2 5gpm going to a Big guy with 4 nozzles. Runs good.
 
There's nothing like 4 bars and high flow, its about 10 times better than 2 bars. 2 nozzles on one bar sounds silly. I'm going to make a 5 and 6 bar setup, its going to rock.
 

Attachments

  • P1010073.JPG
    P1010073.JPG
    607 KB · Views: 10
  • P1010069.JPG
    P1010069.JPG
    533 KB · Views: 11
You must log in or register to reply here.
Back
Top