Search results

My Honda GX390 is being a pain again. With the gun not attached, free flowing, will run about 30 sec then starts to run rough for about 20 sec, then dies. Wait 10 min try again, same thing, changed spark plug and took off carburetor and used carb cleaner to clean it up, put carb back on...

All too often I see little bit of splattered concrete on the vinyl house where they poured the drive or front patio. Is there anything that will remove it safely? and where can I get it? Thanks, Connor

went from a 5x8 to a 6x12. I still need to build some shelving, but mostly done.

Hey guys ( and girls) I am having keith build me a new flier. I am looking for some better before and after shots of Roofs & Decks. If any one is willing to let me use a pic or two, I would greatly appreciate it. you can email them to aquacleanwi@gmail.com Thanks...

I finished it today. Have to say thanks to Lori at PWP for hooking me up with the hose, and making sure that she knew exactly what size fittings I needed before she sent it out. (Jumper was 3/4 to 1/2 and hose was 3/8 to 1/2) I will upgrade to a 60 gal tank when I need it, so far the 35 gal...

Looking for a used 12v Hot box, anyone have one sitting around they may be looking to sell?

Check it out. http://indianapolis.craigslist.org/bfs/1822129422.html

So I am washing a wood table today at a customers house. Changed nozzles and when I pulled the trigger the nozzle shot out of the lance hit the table and went flying into the yard somewhere ( did not find it) it also took the o ring with it. So I put a new o ring in and new nozzle and kept...

Was finishing up a deck strip today, had a 5 gallon bucket with about 2 gal worth of hydroxide stripper. set the lid on and used my foot to tap it down, the lid was brittle as hell and my foot went right thru! I riped my shoe & sock off and rinsed, rinsed, rinsed. What really hurt is that the...

Customer has large shingled roof, they are blue shingles. Only has a few small spots that need to be cleaned, if I clean just those spots, will it be noticeable, Will the SH lighten the color of the shingles? Thanks,

Had a customer call and ask for an estimate on everything, So I went over and gave estimates, all broken down so she could decide what she wants. Calls back 30 min later and said she wants it all.. :) House wash Spider Spray Deck Strip Deck Stain Dock clean Window clean inside and out Gutter...

Had a customer ask me if ready seal has linseed oil or tungoil, I cant find the msds on ready seal to find out?

Was thinking about getting one, do they work? Does it mount on the pump head where a thermal relief valve would go? So would this prevent me from having to walk back to pull the gun trigger after I turned off the engine. http://www.watercannon.com/pc-836-85-ez-start-valve-4100-psi-200018.aspx

My 90 Degree Swivel on my summit reel started leaking today. Can I get replacement parts? Or where do you guys suggest I get a comparable swivel? Thanks,

Just got my first order of ready seal. But I have a dumb question :help:. It has an easy pour screw cap built into the lid. However I want to remove the lid (5 gal pail) and it is not like most 5 gal lids I've seen, doesnt want to come off, is it designed to come off or is there a special...

I only do a couple of Roof Cleanings a yr, have been using a 2.2 gal electric pump set up that I have for applying deck stripper. I came across this little 6.5 hp Baja engine at Tractor supply for 100.00 on clearance, put on a roller pump with Viton seals and it should work well. This is...

I have a 13HP 4gpm, 4000PSI direct drive unit that is 3 yrs old. I was only getting about 2000 PSI a few months ago. ( tried new nozzles and checked to make sure that I was using the right ones, still at 2000PSI) Replaced the unloader, adjusted it to see just what I could get now. still at...

Could some one tell me if and when there is going to be a conference in Milwaukee or Chicago this yr?

I was doing some work at this house today, customer was not home. I noticed that they staining the deck, about half done. They did not bother to clean it first.

see picture, I am trying to check my seals, but am stuck...? Where do I go from here? It is a General 4040G 4000 Psi 4GPM, I am at only 2000 PSI and I replaced my unloader, and still at 2000 PSI,( and yes I adjusted the unleader) It will shoot up to 4100 PSI when i take my hand off...