XJet Kings!! Jeff L. aint got nothin on us!!

[Scott D.]

Ok well maybe that's a stretch!! This is the first building we've ever Xjetted, we've always used a dedicated pump. But today is kinda windy and most of the building didn't have access for a lift so it had to be done from ladders and the ground.

Jeff if you ever need pointers, just call me! LOL

 

[JBurd]

Nice job. what kind of heights could you reach with that xjet - ladder combo? what psi and gpm was your pump?

 

[Scott D.]

With the wind (10-15mph) and standing on the ladders we could reach the top of the 3 story. Finished this building in roughly 6 hours. We use a 4GPM / 4k psi cold water pw.

 

[jlpressure]

LOL, your hose is to short. Looks great Scott. I'll have my people call your people.

We modify our Xjets some, different size hose uses less chem and we can mix it stronger so less filling up buckets and if you bend the fan a certain way it shots ever further and opens the fan more.

You are the Xjet Prince......... LOL Try it on an 8gpm, really fast

 

[Scott D.]

LOL. I dont think we'll be XJetting much in the near future. Still not my cup of tea. This was a last minute decision and we had to use what we had hose wise. We still had to use the dedicated pump for the really touch spots. Luckily those were low on the building!!

 

[Doug Rucker]

LOL, your hose is to short. Looks great Scott. I'll have my people call your people.

We modify our Xjets some, different size hose uses less chem and we can mix it stronger so less filling up buckets and if you bend the fan a certain way it shots ever further and opens the fan more.

You are the Xjet Prince......... LOL Try it on an 8gpm, really fast

Speaking of this, can I use 30 feet of hose on an x jet so I can cut down on moving the bucket so much.

 

[jlpressure]

Speaking of this, can I use 30 feet of hose on an x jet so I can cut down on moving the bucket so much.

We use 40 - 50 feet. We also use 1/4 in hose with 1/4" hose barbs and shut off valves. You don't have to fill the bucket as much, just mix the chem a little stronger, saves a lot of time

 

[Doug Rucker]

Cool thanks

 

[A-OK Pressure]

Jeff,
Wich way do bend the fins in the M-Jet to get more hieght?
Thanks
Attila

 

[Russ Spence]

Speaking of this, can I use 30 feet of hose on an x jet so I can cut down on moving the bucket so much.

According to the manufacturer you can use up to 100 feet of hose on the x jet, I have used 80 feet without problems.

 

[A AND J POWERWASHING]

We x jet all large buildings , works fast

 

[Clean County PW]

The Best way to deal with X-jets and we've been using them since the late 90's and tried many different ways, We found out a way that works the best for us. We have a 10-15 tanks strapped on Handrucks with about 40'of X-Jet hose wraped around the Tank and Handtruck. We mixed our House or bulding wash in to these tanks. These work best for us because we need to have them mobile so much more so then just being mounted on a truck. The 5 gal. buckets are a thing of the past and 5 gal buckets will fall over sooner or later for some dumb reason because I know....I've done it

 

[Lightning Gene]

I would have foamed it without the ladder

 

[Ron Musgraves]

Nice Job Scott

 

[midatlanticpower]

How would you reach the top of the building with the foamer? I'm assuming up and down the extension ladders?

 

[The Cleaner]

I use a 0 soap tip and a 50ft section of H/P hose and drop my injector into the tank, I get a pretty strong mix from 50ft.

 

[midatlanticpower]

I guess you have to park pretty close to what your washing with 50 ft or do use portable machines?

 

[DeJay]

Two words. Down Stream. Nice gig tho.