New Lafferty Dual Purpose Foamer

Apple Roof Cleaning

Roof Cleaning Instructor
I wanted to make you guys aware of the new Lafferty Dual Purpose Foamer.
My interests in this are roof cleaning only, since we do not do KEC.
I have been in close contact with Bob from Lafferty through the development of this, and perhaps some of you already know ?
For those who do not, here it is :wave2:

Good afternoon Chris,

I have a short flash video showing the new commercial kitchen foamer from Lafferty. It's a preliminary demonstration but it shows the versatility of the product. You will see the foamer adjusted from a drier foam to a more wet and clingy foam. It proves the application versatility available to the operator. The surfaces used in the shots were the metal test booths at our manufacturing facility in N Little Rock. It demonstrates the foam is easily applied and how nicely it clings. This was all accomplished with less than 1 CFM of air! Note the angled applicator to easily reach up to inside corners or even into the bottom of the duct.

This unit, model 935155 is now being tested in San Antonio and can be easily modified to address roof cleaning as well!

Best regards,

Bob St Lawrence
Lafferty Equipment

(727) 491-3896


 
Is this foamer available now? How does it work for roof applications?:clapping:
I dunnno, have to call Bob from Lafferty.
It is BRAND New, just wanted to pass on the info.
I have not tried it yet.
 
Judging by the ppe this guy doing the demo has on, there is no caustics in that foam. Caustic changes every thing, Any one use one of these yet?
If the foaming surfactant is unconditionally alkaline stable, it should help.
I have known roof cleaners dump 8 bottles of Dawn in a 300 gallon chlorine/water tank. After 24 hours, you will be lucky to have suds. But use 1/4 gallon of Myristimine or Ammonyx , and run your tank down to empty. When you try to refill, you have to fill the water slowly, or foam suds will creep out the top of the tank.
 
My foamer does that now....and I'm tired of it :slap:
Way too SLOW!!!

Watching that video is just irritatingly to slow.
If you know me you know I have NO Patience.
 
So i switched from a delco bucket foamer to straight degreaser when i started using a caustic based cleaner. Any one using this type of cleaner in a foamer?

Bucket foamer?

Umm caustic, does it work...? :thank_you2:
does this count?
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/OZCsHRwBmMQ?fs=1&hl=en_US&color1=0x402061&color2=0x9461ca"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/OZCsHRwBmMQ?fs=1&hl=en_US&color1=0x402061&color2=0x9461ca" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
 
Back
Top